diff --git a/acs2/nladmin-ui/src/i18n/langs/monitor/en.js b/acs2/nladmin-ui/src/i18n/langs/monitor/en.js
index 19c9f4eda..661d0bb63 100644
--- a/acs2/nladmin-ui/src/i18n/langs/monitor/en.js
+++ b/acs2/nladmin-ui/src/i18n/langs/monitor/en.js
@@ -38,6 +38,87 @@ export default {
       'the_past_week': 'The Past Week',
       'the_past_month': 'The Past Month',
       'the_past_three_months': 'The Past Three Months'
+    },
+    'click': {
+      'device_information': 'Device Information',
+      'monitor_item': 'Monitor Item',
+      'current_value': 'current value',
+      'device_setup': 'Device Settings',
+      'bar_code': 'Bar code',
+      'request_flag': 'Request flag',
+      'out_of_stock': 'Out of stock',
+      'with_pallets': 'There is a tray',
+      'pallets_and_goods': 'There are pallets and goods',
+      'material_code': 'Material code',
+      'disabled_manipulator': 'Disable manipulator',
+      'normal': 'normal',
+      'forbidden': 'disable',
+      'job_command': 'job command',
+      'recall': 'recall',
+      'scram': 'crash stop',
+      'police_clearance': 'clear the police',
+      'keep_out_of_storage': 'Keep out of storag',
+      'no_release': 'No export',
+      'stop_task': 'Stop task',
+      'equipment_number': 'Device number',
+      'device_name': 'Device name',
+      'exception_message': 'exception message',
+      'photoelectric_signal': 'photoelectric signal',
+      'mode': 'mode',
+      'alarm': 'alarm',
+      'ip_address': 'IP',
+      'pallet_quantity': 'Pallet quantity',
+      'instruction_information': 'instruction information',
+      'note_information': 'Remark information',
+      'current_instruction_message': 'current instruction information',
+      'last_instruction_message': 'last command information',
+      'action_signal': 'action signal',
+      'clearance_signal': 'allow in and out signal',
+      'materiel': 'material',
+      'lot': 'batch',
+      'request_task': 'Whether to request a task',
+      'request_order': 'Whether to request instructions',
+      'apply_labeling': 'Whether to apply for labelling',
+      'apply_for_bundling': 'Whether to apply for bundling',
+      'device_status': 'Device status',
+      'weight': 'weight',
+      'front_station_photoelectric_signal': 'forward station photoelectric signal',
+      'open': 'On',
+      'close': 'Off',
+      'AGV_phase': 'AGV Interaction Phase',
+      'description_of_the_AGV_phase': 'AGV Interaction Phase Description',
+      'AGV_action': 'AGV action',
+      'AGV_power': 'AGV Power',
+      'post-station_photoelectric_signal': 'post-station photoelectric signal',
+      'front_station_action_signal': 'forward motion signal',
+      'back_station_action_signal': 'post action signal',
+      'walk_y': 'walking column',
+      'previous_station_task': 'Former station task number',
+      'back_station_task': 'station task Back number',
+      'task_number': 'task number',
+      'disable': 'Whether to disable',
+      'current_temperature': 'Current temperature',
+      'oven_finish': 'Oven complete',
+      'house': 'Constant temperature countdown-house',
+      'minutes': 'Constant temperature countdown-minutes',
+      'seconds': 'Constant temperature countdown-seconds',
+      'gate_state': 'gate state',
+      'task_creation_failure': 'Cause of task creation failure',
+      'failed_to_create_instruction': 'Cause of instruction creation failure',
+      'no_electrical_signal_feedback_cause': 'Cause of no electrical signal feedback',
+      'request_success_flag': 'request success flag',
+      'delivery_completed': 'Outbound complete',
+      'inventory_quantity': 'inventory quantity',
+      'angle': 'Angle',
+      'electric_quantity': 'electricity',
+      'status': 'state',
+      'abnormal': 'exception',
+      'floor': 'floor',
+      'tray': 'tray',
+      'loading_or_not': 'loading or not',
+      'barcode': 'Vehicle number',
+      'barcode_length': 'Vehicle length',
+      'last_container': 'Last vehicle number'
     }
   }
 }
diff --git a/acs2/nladmin-ui/src/i18n/langs/monitor/in.js b/acs2/nladmin-ui/src/i18n/langs/monitor/in.js
index 1a2b9ecee..e453e01cd 100644
--- a/acs2/nladmin-ui/src/i18n/langs/monitor/in.js
+++ b/acs2/nladmin-ui/src/i18n/langs/monitor/in.js
@@ -38,6 +38,87 @@ export default {
       'the_past_week': 'Minggu Terakhir',
       'the_past_month': 'Bulan Terakhir',
       'the_past_three_months': 'Tiga Bulan Terakhir'
+    },
+    'click': {
+      'device_information': 'Informasi divaiscomment',
+      'monitor_item': 'kata',
+      'current_value': 'nilai saat ini',
+      'device_setup': 'pengaturan perangkat',
+      'bar_code': 'Kode bar',
+      'request_flag': 'minta tanda',
+      'out_of_stock': 'Tidak ada barang',
+      'with_pallets': 'Dengan nampan',
+      'pallets_and_goods': 'Seorang baki telah tiba',
+      'material_code': 'Kode material',
+      'disabled_manipulator': 'Matikan mesinnya',
+      'normal': 'normal',
+      'forbidden': 'nonaktifkan',
+      'job_command': 'Perintah untuk pekerjaan rumah',
+      'recall': 'Mengingat',
+      'scram': 'Berhenti',
+      'police_clearance': 'Polisi bersih',
+      'keep_out_of_storage': 'Dilarang masuk',
+      'no_release': 'Keluarkan uang',
+      'stop_task': 'Hentikan misi',
+      'equipment_number': 'nomor divais',
+      'device_name': 'nama divais',
+      'exception_message': 'pesan yang tidak biasa',
+      'photoelectric_signal': 'Sinyal fotolistrik',
+      'mode': 'pola',
+      'alarm': 'polisi',
+      'ip_address': 'IP',
+      'pallet_quantity': 'Kuantitas baki',
+      'instruction_information': 'pesan ke',
+      'note_information': 'Catatan informasi',
+      'current_instruction_message': 'Pesan perintah saat ini',
+      'last_instruction_message': 'Pesan tindakan terakhir',
+      'action_signal': 'sinyal aksi',
+      'clearance_signal': 'izin untuk masuk dan keluar sinyal',
+      'materiel': 'Bahan',
+      'lot': 'Batch',
+      'request_task': 'Apakah permintaan tugas',
+      'request_order': 'Apakah penerapan perintah',
+      'apply_labeling': 'Apakah saya memasukkan sebuah stiker',
+      'apply_for_bundling': 'Apakah berkas diterapkan',
+      'device_status': 'status divais',
+      'weight': 'Berat',
+      'front_station_photoelectric_signal': 'Bekas tiang listrik',
+      'open': 'Buka',
+      'close': 'Hilang',
+      'AGV_phase': 'Persetujuan AGV',
+      'description_of_the_AGV_phase': 'Persetujuan AGV Keterangan',
+      'AGV_action': 'Aksi AGV',
+      'AGV_power': 'AGV daya',
+      'post-station_photoelectric_signal': 'Tiang layar cahaya',
+      'front_station_action_signal': 'Mantan sinyal aksi industri',
+      'back_station_action_signal': 'Sinyal aksi tertinggal',
+      'walk_y': 'Treks',
+      'previous_station_task': 'Mantan pegawai stasiun',
+      'back_station_task': 'Back star number',
+      'task_number': 'Mission no',
+      'disable': 'apakah dinonaktifkan',
+      'current_temperature': 'Suhu saat ini',
+      'oven_finish': 'Oven selesai',
+      'house': 'Hitung mundur temperatur-waktu',
+      'minutes': 'Hitung mundur temperatur-Membagi',
+      'seconds': 'Hitung mundur temperatur-Detik',
+      'gate_state': 'status pintu',
+      'task_creation_failure': 'Penyebab kegagalan penciptaan',
+      'failed_to_create_instruction': 'Penyebab kegagalan penciptaan instruksi',
+      'no_electrical_signal_feedback_cause': 'Tidak ada umpan balik penyebab listrik',
+      'request_success_flag': 'sukses ditandai',
+      'delivery_completed': 'Ekspor-impor selesai',
+      'inventory_quantity': 'jumlah persediaan',
+      'angle': 'Sudut',
+      'electric_quantity': 'Baterai',
+      'status': 'Status',
+      'abnormal': 'Anomali',
+      'floor': 'lantai',
+      'tray': 'Nampan',
+      'loading_or_not': 'dimuat atau tidak',
+      'barcode': 'Angkat tanda',
+      'barcode_length': 'Perjalanan panjang',
+      'last_container': 'Nomor muatan terakhir'
     }
   }
 }
diff --git a/acs2/nladmin-ui/src/i18n/langs/monitor/zh.js b/acs2/nladmin-ui/src/i18n/langs/monitor/zh.js
index 0d5af1855..f1d35565a 100644
--- a/acs2/nladmin-ui/src/i18n/langs/monitor/zh.js
+++ b/acs2/nladmin-ui/src/i18n/langs/monitor/zh.js
@@ -38,6 +38,87 @@ export default {
       'the_past_week': '最近一周',
       'the_past_month': '最近一个月',
       'the_past_three_months': '最近三个月'
+    },
+    'click': {
+      'device_information': '设备信息',
+      'monitor_item': '监控项',
+      'current_value': '当前值',
+      'device_setup': '设备设置',
+      'bar_code': '条码',
+      'request_flag': '请求标记',
+      'out_of_stock': '无货',
+      'with_pallets': '有托盘',
+      'pallets_and_goods': '有托盘有货',
+      'material_code': '物料编码',
+      'disabled_manipulator': '禁用机械手',
+      'normal': '正常',
+      'forbidden': '禁用',
+      'job_command': '作业命令',
+      'recall': '召回',
+      'scram': '急停',
+      'police_clearance': '清警',
+      'keep_out_of_storage': '禁止入库',
+      'no_release': '禁止出库',
+      'stop_task': '停止任务',
+      'equipment_number': '设备编号',
+      'device_name': '设备名称',
+      'exception_message': '异常信息',
+      'photoelectric_signal': '光电信号',
+      'mode': '模式',
+      'alarm': '报警',
+      'ip_address': 'IP地址',
+      'pallet_quantity': '托盘数量',
+      'instruction_information': '指令信息',
+      'note_information': '备注信息',
+      'current_instruction_message': '当前指令信息',
+      'last_instruction_message': '上次指令信息',
+      'action_signal': '动作信号',
+      'clearance_signal': '允许进出信号',
+      'materiel': '物料',
+      'lot': '批次',
+      'request_task': '是否请求任务',
+      'request_order': '是否申请指令',
+      'apply_labeling': '是否申请贴标',
+      'apply_for_bundling': '是否申请捆扎',
+      'device_status': '设备状态',
+      'weight': '重量',
+      'front_station_photoelectric_signal': '前工位光电信号',
+      'open': '开',
+      'close': '关',
+      'AGV_phase': 'AGV交互阶段',
+      'description_of_the_AGV_phase': 'AGV交互阶段说明',
+      'AGV_action': 'AGV动作',
+      'AGV_power': 'AGV电量',
+      'post-station_photoelectric_signal': '后工位光电信号',
+      'front_station_action_signal': '前工位动作信号',
+      'back_station_action_signal': '后工位动作信号',
+      'walk_y': '行走列',
+      'previous_station_task': '前工位任务号',
+      'back_station_task': '后工位任务号',
+      'task_number': '任务号',
+      'disable': '是否禁用',
+      'current_temperature': '当前温度',
+      'oven_finish': '烘箱完成',
+      'house': '恒温倒计时-时',
+      'minutes': '恒温倒计时-分',
+      'seconds': '恒温倒计时-秒',
+      'gate_state': '门状态',
+      'task_creation_failure': '任务创建失败原因',
+      'failed_to_create_instruction': '指令创建失败原因',
+      'no_electrical_signal_feedback_cause': '未反馈电气信号原因',
+      'request_success_flag': '请求成功标记',
+      'delivery_completed': '出库完成',
+      'inventory_quantity': '库存数量',
+      'angle': '角度',
+      'electric_quantity': '电量',
+      'status': '状态',
+      'abnormal': '异常',
+      'floor': '楼层',
+      'tray': '托盘',
+      'loading_or_not': '是否装载',
+      'barcode': '载具号',
+      'barcode_length': '载具长度',
+      'last_container': '上次载具号'
     }
   }
 }
diff --git a/acs2/nladmin-ui/src/views/system/monitor/device/index.vue b/acs2/nladmin-ui/src/views/system/monitor/device/index.vue
index 398bdba82..188ef2aa8 100644
--- a/acs2/nladmin-ui/src/views/system/monitor/device/index.vue
+++ b/acs2/nladmin-ui/src/views/system/monitor/device/index.vue
@@ -6,7 +6,7 @@
     <!--点击设备显示信息-->
     <el-dialog
       id="dialogs"
-      title="设备信息"
+      :title="$t('monitor.click.device_information')"
       class="newDialog"
       :visible.sync="dialogDeviceMsgVisible"
       width="22%"
@@ -21,189 +21,189 @@
       >
         <el-table-column
           prop="name"
-          label="监控项"
+          :label="$t('monitor.click.monitor_item')"
         />
         <el-table-column
           prop="value"
-          label="当前值"
+          :label="$t('monitor.click.current_value')"
         />
       </el-table>
     </el-dialog>
     <!--弹窗设置设备与图标绑定与角度-->
-    <el-dialog title="设备设置" :visible.sync="dialogFormVisible" width="35%">
+    <el-dialog :title="$t('monitor.click.device_setup')" :visible.sync="dialogFormVisible" width="35%">
       <el-form :model="form" size="small">
-        <el-form-item label="设备编号" prop="device_code" label-width="120px">
+        <el-form-item :label="$t('monitor.click.equipment_number')" prop="device_code" label-width="120px">
           <el-input v-model="form.device_code" :disabled="true" />
         </el-form-item>
-        <el-form-item label="条码" label-width="120px">
+        <el-form-item :label="$t('monitor.click.bar_code')" label-width="120px">
           <el-input v-model="form.hand_barcode" :disabled="false" />
         </el-form-item>
-        <el-form-item label="请求标记" prop="requireSucess" label-width="120px">
+        <el-form-item :label="$t('monitor.click.request_flag')" prop="requireSucess" label-width="120px">
           <el-radio-group v-model="form.requireSucess">
-            <el-radio-button :label="0">否</el-radio-button>
-            <el-radio-button :label="1">是</el-radio-button>
+            <el-radio-button :label="0">{{ $t('auto.common.false') }}</el-radio-button>
+            <el-radio-button :label="1">{{ $t('auto.common.true') }}</el-radio-button>
           </el-radio-group>
         </el-form-item>
       </el-form>
       <div slot="footer" class="dialog-footer">
-        <el-button @click="dialogFormVisible = false">取 消</el-button>
-        <el-button type="primary" @click="dialogSave">确 定</el-button>
+        <el-button @click="dialogFormVisible = false">{{ $t('auto.common.Cancel') }}</el-button>
+        <el-button type="primary" @click="dialogSave">{{ $t('auto.common.Confirm') }}</el-button>
       </div>
     </el-dialog>
     <!--弹窗设置设备与图标绑定与角度-->
-    <el-dialog title="设备设置" :visible.sync="dialogFormVisible3" width="35%">
+    <el-dialog :title="$t('monitor.click.device_setup')" :visible.sync="dialogFormVisible3" width="35%">
       <el-form :model="form" size="small">
-        <el-form-item label="设备编号" prop="device_code" label-width="80px">
+        <el-form-item :label="$t('monitor.click.equipment_number')" prop="device_code" label-width="80px">
           <el-input v-model="form.device_code" :disabled="true" />
         </el-form-item>
-        <el-form-item label="设备状态" label-width="80px">
+        <el-form-item :label="$t('monitor.click.device_status')" label-width="80px">
           <el-radio-group v-model="form.hasGoodStatus">
-            <el-radio-button :label="0">无货</el-radio-button>
-            <el-radio-button :label="1">有托盘</el-radio-button>
-            <el-radio-button :label="2">有托盘有货</el-radio-button>
+            <el-radio-button :label="0">{{ $t('monitor.click.out_of_stock') }}</el-radio-button>
+            <el-radio-button :label="1">{{ $t('monitor.click.with_pallets') }}</el-radio-button>
+            <el-radio-button :label="2">{{ $t('monitor.click.pallets_and_goods') }}</el-radio-button>
           </el-radio-group>
         </el-form-item>
-        <el-form-item label="物料编码" prop="material_type" label-width="80px">
+        <el-form-item :label="$t('monitor.click.material_code')" prop="material_type" label-width="80px">
           <el-input v-model="form.material_type" />
         </el-form-item>
       </el-form>
       <div slot="footer" class="dialog-footer">
-        <el-button @click="dialogFormVisible3 = false">取 消</el-button>
-        <el-button type="primary" @click="dialogSave">确 定</el-button>
+        <el-button @click="dialogFormVisible3 = false">{{ $t('auto.common.Cancel') }}</el-button>
+        <el-button type="primary" @click="dialogSave">{{ $t('auto.common.Confirm') }}</el-button>
       </div>
     </el-dialog>
 
     <!--弹窗设置设备与图标绑定与角度-->
-    <el-dialog title="设备设置" :visible.sync="dialogFormVisible4" width="35%">
+    <el-dialog :title="$t('monitor.click.device_setup')" :visible.sync="dialogFormVisible4" width="35%">
       <el-form :model="form" size="small">
-        <el-form-item label="设备编号" prop="device_code" label-width="120px">
+        <el-form-item :label="$t('monitor.click.equipment_number')" prop="device_code" label-width="120px">
           <el-input v-model="form.device_code" :disabled="true" />
         </el-form-item>
-        <el-form-item label="禁用机械手" prop="is_disable" label-width="120px">
+        <el-form-item :label="$t('monitor.click.disabled_manipulator')" prop="is_disable" label-width="120px">
           <el-radio-group v-model="form.is_disable">
-            <el-radio-button :label="0">正常</el-radio-button>
-            <el-radio-button :label="1">禁用</el-radio-button>
+            <el-radio-button :label="0">{{ $t('monitor.click.normal') }}</el-radio-button>
+            <el-radio-button :label="1">{{ $t('monitor.click.forbidden') }}</el-radio-button>
           </el-radio-group>
         </el-form-item>
-        <el-form-item label="请求标记" prop="requireSucess" label-width="120px">
+        <el-form-item :label="$t('monitor.click.request_flag')" prop="requireSucess" label-width="120px">
           <el-radio-group v-model="form.requireSucess">
-            <el-radio-button :label="0">否</el-radio-button>
-            <el-radio-button :label="1">是</el-radio-button>
+            <el-radio-button :label="0"> {{ $t('auto.common.false') }}</el-radio-button>
+            <el-radio-button :label="1">{{ $t('auto.common.true') }}</el-radio-button>
           </el-radio-group>
         </el-form-item>
       </el-form>
       <div slot="footer" class="dialog-footer">
-        <el-button @click="dialogFormVisible4 = false">取 消</el-button>
-        <el-button type="primary" @click="dialogSave">确 定</el-button>
+        <el-button @click="dialogFormVisible4 = false">{{ $t('auto.common.Cancel') }}</el-button>
+        <el-button type="primary" @click="dialogSave">{{ $t('auto.common.Confirm') }}</el-button>
       </div>
     </el-dialog>
 
-    <el-dialog title="设备设置" :visible.sync="dialogFormVisible5" width="35%">
+    <el-dialog :title="$t('monitor.click.device_setup')" :visible.sync="dialogFormVisible5" width="35%">
       <el-form :model="form" size="small">
-        <el-form-item label="设备编号" prop="device_code" label-width="120px">
+        <el-form-item :label="$t('monitor.click.equipment_number')" prop="device_code" label-width="120px">
           <el-input v-model="form.device_code" :disabled="true" />
         </el-form-item>
-        <el-form-item label="请求标记" prop="requireSucess" label-width="120px">
+        <el-form-item :label="$t('monitor.click.request_flag')" prop="requireSucess" label-width="120px">
           <el-radio-group v-model="form.requireSucess">
-            <el-radio-button :label="0">否</el-radio-button>
-            <el-radio-button :label="1">是</el-radio-button>
+            <el-radio-button :label="0"> {{ $t('auto.common.false') }}</el-radio-button>
+            <el-radio-button :label="1">{{ $t('auto.common.true') }}</el-radio-button>
           </el-radio-group>
         </el-form-item>
       </el-form>
       <div slot="footer" class="dialog-footer">
-        <el-button @click="dialogFormVisible5 = false">取 消</el-button>
-        <el-button type="primary" @click="dialogSave">确 定</el-button>
+        <el-button @click="dialogFormVisible5 = false">{{ $t('auto.common.Cancel') }}</el-button>
+        <el-button type="primary" @click="dialogSave">{{ $t('auto.common.Confirm') }}</el-button>
       </div>
     </el-dialog>
 
-    <el-dialog title="设备设置" :visible.sync="dialogFormVisible7" width="35%">
+    <el-dialog :title="$t('monitor.click.device_setup')" :visible.sync="dialogFormVisible7" width="35%">
       <el-form :model="form" size="small">
-        <el-form-item label="设备编号" prop="device_code" label-width="120px">
+        <el-form-item :label="$t('monitor.click.equipment_number')" prop="device_code" label-width="120px">
           <el-input v-model="form.device_code" :disabled="true" />
         </el-form-item>
-        <el-form-item label="条码" label-width="120px">
+        <el-form-item :label="$t('monitor.click.bar_code')" label-width="120px">
           <el-input v-model="form.hand_barcode" :disabled="false" />
         </el-form-item>
-        <el-form-item label="请求标记" prop="requireSucess" label-width="120px">
+        <el-form-item :label="$t('monitor.click.request_flag')" prop="requireSucess" label-width="120px">
           <el-radio-group v-model="form.requireSucess">
-            <el-radio-button :label="0">否</el-radio-button>
-            <el-radio-button :label="1">是</el-radio-button>
+            <el-radio-button :label="0"> {{ $t('auto.common.false') }}</el-radio-button>
+            <el-radio-button :label="1">{{ $t('auto.common.true') }}</el-radio-button>
           </el-radio-group>
         </el-form-item>
       </el-form>
       <div slot="footer" class="dialog-footer">
-        <el-button @click="dialogFormVisible7 = false">取 消</el-button>
-        <el-button type="primary" @click="dialogSave">确 定</el-button>
+        <el-button @click="dialogFormVisible7 = false">{{ $t('auto.common.Cancel') }}</el-button>
+        <el-button type="primary" @click="dialogSave">{{ $t('auto.common.Confirm') }}</el-button>
       </div>
     </el-dialog>
 
-    <el-dialog title="设备设置" :visible.sync="dialogFormVisible6" width="35%">
+    <el-dialog :title="$t('monitor.click.device_setup')" :visible.sync="dialogFormVisible6" width="35%">
       <el-form :model="form" size="small">
-        <el-form-item label="设备编号" prop="device_code" label-width="120px">
+        <el-form-item :label="$t('monitor.click.equipment_number')" prop="device_code" label-width="120px">
           <el-input v-model="form.device_code" :disabled="true" />
         </el-form-item>
         <el-form-item label="申请指令标记" prop="requireSucess" label-width="120px">
           <el-radio-group v-model="form.requireSucess">
-            <el-radio-button :label="0">否</el-radio-button>
-            <el-radio-button :label="1">是</el-radio-button>
+            <el-radio-button :label="0"> {{ $t('auto.common.false') }}</el-radio-button>
+            <el-radio-button :label="1">{{ $t('auto.common.true') }}</el-radio-button>
           </el-radio-group>
         </el-form-item>
         <el-form-item label="请求任务标记" prop="applySucess" label-width="120px">
           <el-radio-group v-model="form.applySucess">
-            <el-radio-button :label="0">否</el-radio-button>
-            <el-radio-button :label="1">是</el-radio-button>
+            <el-radio-button :label="0"> {{ $t('auto.common.false') }}</el-radio-button>
+            <el-radio-button :label="1">{{ $t('auto.common.true') }}</el-radio-button>
           </el-radio-group>
         </el-form-item>
       </el-form>
       <div slot="footer" class="dialog-footer">
-        <el-button @click="dialogFormVisible5 = false">取 消</el-button>
-        <el-button type="primary" @click="dialogSave">确 定</el-button>
+        <el-button @click="dialogFormVisible5 = false">{{ $t('auto.common.Cancel') }}</el-button>
+        <el-button type="primary" @click="dialogSave">{{ $t('auto.common.Confirm') }}</el-button>
       </div>
     </el-dialog>
 
     <!--弹窗设置设备与图标绑定与角度-->
-    <el-dialog title="设备设置" :visible.sync="dialogFormVisible1" width="35%">
+    <el-dialog :title="$t('monitor.click.device_setup')" :visible.sync="dialogFormVisible1" width="35%">
       <el-form :model="form" size="small">
-        <el-form-item label="设备编号" prop="device_code" label-width="80px">
+        <el-form-item :label="$t('monitor.click.equipment_number')" prop="device_code" label-width="80px">
           <el-input v-model="form.device_code" :disabled="true" />
         </el-form-item>
 
-        <el-form-item label="条码" prop="device_code" label-width="80px">
+        <el-form-item :label="$t('monitor.click.bar_code')" prop="device_code" label-width="80px">
           <el-input v-model="form.barcode" :disabled="false" />
         </el-form-item>
       </el-form>
       <div slot="footer" class="dialog-footer">
-        <el-button @click="dialogFormVisible1 = false">取 消</el-button>
-        <el-button type="primary" @click="saveBarcode">确 定</el-button>
+        <el-button @click="dialogFormVisible1 = false">{{ $t('auto.common.Cancel') }}</el-button>
+        <el-button type="primary" @click="saveBarcode">{{ $t('auto.common.Confirm') }}</el-button>
       </div>
     </el-dialog>
 
     <!--   堆垛机弹出框 -->
-    <el-dialog title="设备设置" :visible.sync="dialogFormVisible8" width="35%">
+    <el-dialog :title="$t('monitor.click.device_setup')" :visible.sync="dialogFormVisible8" width="35%">
       <el-form :model="form" size="small">
-        <el-form-item label="设备编号" prop="device_code" label-width="120px">
+        <el-form-item :label="$t('monitor.click.equipment_number')" prop="device_code" label-width="120px">
           <el-input v-model="form.device_code" :disabled="true" />
         </el-form-item>
-        <el-form-item label="作业命令" prop="toCommand" label-width="120px">
+        <el-form-item :label="$t('monitor.click.job_command')" prop="toCommand" label-width="120px">
           <el-radio-group v-model="form.toCommand">
-            <el-radio-button :label="7" >召回</el-radio-button>
-            <el-radio-button :label="8">急停</el-radio-button>
-            <el-radio-button :label="5">清警</el-radio-button>
+            <el-radio-button :label="7" >{{ $t('monitor.click.recall') }}</el-radio-button>
+            <el-radio-button :label="8">{{ $t('monitor.click.scram') }}</el-radio-button>
+            <el-radio-button :label="5">{{ $t('monitor.click.police_clearance') }}</el-radio-button>
           </el-radio-group>
         </el-form-item>
-        <el-form-item label="禁止入库" prop="prohibitInWarehouse" label-width="120px">
+        <el-form-item :label="$t('monitor.click.keep_out_of_storage')" prop="prohibitInWarehouse" label-width="120px">
           <el-switch v-model="form.prohibitInWarehouse" />
         </el-form-item>
-        <el-form-item label="禁止出库" prop="prohibitOutWarehouse" label-width="120px">
+        <el-form-item :label="$t('monitor.click.no_release')" prop="prohibitOutWarehouse" label-width="120px">
           <el-switch v-model="form.prohibitOutWarehouse" />
         </el-form-item>
-        <el-form-item label="停止任务" prop="stopReceiveTask" label-width="120px">
+        <el-form-item :label="$t('monitor.click.stop_task')" prop="stopReceiveTask" label-width="120px">
           <el-switch v-model="form.stopReceiveTask" />
         </el-form-item>
       </el-form>
       <div slot="footer" class="dialog-footer">
-        <el-button @click="dialogFormVisible8 = false">取 消</el-button>
-        <el-button type="primary" @click="dialogSave">确 定</el-button>
+        <el-button @click="dialogFormVisible8 = false">{{ $t('auto.common.Cancel') }}</el-button>
+        <el-button type="primary" @click="dialogSave">{{ $t('auto.common.Confirm') }}</el-button>
       </div>
     </el-dialog>
   </div>
@@ -211,7 +211,6 @@
 
 <script>
 import crudStage from '@/api/logicflow/stage'
-import paramCrud from '@/api/system/param'
 import deviceCrud from '@/api/acs/device/device'
 import { getDeviceByCodes } from '@/api/acs/device/deviceStageMonitor'
 import '@logicflow/core/dist/style/index.css'
@@ -219,6 +218,7 @@ import '@logicflow/extension/lib/style/index.css'
 
 import { LogicFlow } from '@logicflow/core'
 import { registerCustomElement } from '@/views/system/logicflow/editor/components/node'
+import i18n from '@/i18n'
 
 let data = {}
 let lf = ''
@@ -421,7 +421,7 @@ export default {
       if (item.device_code && item.data) {
         // console.log('item', item)
         this.arr = [
-          { name: '设备编号', value: item.device_code },
+          { name: i18n.t('monitor.click.equipment_number'), value: item.device_code },
           { name: '设备名称', value: item.device_name }
         ]
         const data = item.data
@@ -430,212 +430,212 @@ export default {
             continue
           }
           if (val === 'message' && data.isError === true) {
-            const obj = { name: '设备信息', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.device_information'), value: data[val] }
             this.arr.push(obj)
           }
 
           if (val === 'message' && data.isError === 'false') {
-            const obj = { name: '异常信息', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.exception_message'), value: data[val] }
             this.arr.push(obj)
           }
 
           if (val === 'move') {
-            const obj = { name: '光电信号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.photoelectric_signal'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'mode') {
-            const obj = { name: '模式', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.mode'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'error') {
-            const obj = { name: '报警', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.alarm'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'ip') {
-            const obj = { name: 'IP地址', value: data[val] }
+            const obj = { name: 'IP', value: data[val] }
             this.arr.push(obj)
           } else if (val === 'number') {
-            const obj = { name: '托盘数量', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.pallet_quantity'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'inst_message') {
-            const obj = { name: '指令信息', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.instruction_information'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'message') {
-            const obj = { name: '备注信息', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.note_information'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'inst_message') {
-            const obj = { name: '当前指令信息', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.current_instruction_message'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'last_inst_message') {
-            const obj = { name: '上次指令信息', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.last_instruction_message'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'barcode') {
-            const obj = { name: '载具号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.barcode'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'barcode_length') {
-            const obj = { name: '载具长度', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.barcode_length'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'last_container') {
-            const obj = { name: '上次载具号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.last_container'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'instruction_code') {
-            const obj = { name: '指令号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.current_instruction_message'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'task_code') {
-            const obj = { name: '任务号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.task_number'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'last_instruction_code') {
-            const obj = { name: '上次指令号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.last_instruction_message'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'action') {
-            const obj = { name: '动作信号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.action_signal'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'io_action') {
-            const obj = { name: '允许进出信号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.clearance_signal'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'material') {
-            const obj = { name: '物料', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.materiel'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'batch') {
-            const obj = { name: '批次', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.lot'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'requestSucess') {
-            const obj = { name: '是否请求任务', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.request_task'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'applySucess') {
-            const obj = { name: '是否申请指令', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.request_order'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'requireApplyLabelingSuccess') {
-            const obj = { name: '是否申请贴标', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.apply_labeling'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'requireApplyLaStrangulationSuccess') {
-            const obj = { name: '是否申请捆扎', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.apply_for_bundling'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'status') {
-            const obj = { name: '设备状态', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.device_status'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'weight') {
-            const obj = { name: '重量', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.weight'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'move_1') {
-            const obj = { name: '前工位光电信号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.front_station_photoelectric_signal'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'open') {
-            const obj = { name: '开到位', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.open'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'close') {
-            const obj = { name: '关到位', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.close'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'phase') {
-            const obj = { name: 'AGV交互阶段', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.AGV_phase'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'phase_name') {
-            const obj = { name: 'AGV交互阶段说明', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.description_of_the_AGV_phase'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'option') {
-            const obj = { name: 'AGV动作', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.AGV_action'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'agv_power') {
-            const obj = { name: 'AGV电量', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.AGV_power'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'move_2') {
-            const obj = { name: '后工位光电信号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.station_photoelectric_signal'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'action_1') {
-            const obj = { name: '前工位动作信号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.front_station_action_signal'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'action_2') {
-            const obj = { name: '后工位动作信号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.back_station_action_signal'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'walk_y') {
-            const obj = { name: '行走列', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.walk_y'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'task1') {
-            const obj = { name: '前工位任务号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.previous_station_task'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'task2') {
-            const obj = { name: '后工位任务号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.back_station_task'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'task') {
-            const obj = { name: '任务号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.task_number'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'is_disable') {
-            const obj = { name: '是否禁用', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.disable'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'temperature') {
-            const obj = { name: '当前温度', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.current_temperature'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'finish') {
-            const obj = { name: '烘箱完成', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.oven_finish'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'countdown_house') {
-            const obj = { name: '恒温倒计时(时)', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.house'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'countdown_min') {
-            const obj = { name: '恒温倒计时(分)', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.minutes'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'countdown_sec') {
-            const obj = { name: '恒温倒计时(秒)', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.seconds'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'door') {
-            const obj = { name: '门状态', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.gate_state'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'notCreateTaskMessage') {
-            const obj = { name: '任务创建失败原因', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.task_creation_failure'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'notCreateInstMessage') {
-            const obj = { name: '指令创建失败原因', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.failed_to_create_instruction'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'feedMessage') {
-            const obj = { name: '未反馈电气信号原因', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.no_electrical_signal_feedback_cause'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'requireSucess') {
-            const obj = { name: '请求成功标记', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.request_success_flag'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'applySucess') {
             const obj = { name: 'applySucess', value: data[val] }
             this.arr.push(obj)
           } else if (val === 'out_finish') {
-            const obj = { name: '出库完成', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.delivery_completed'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'inventory_qty') {
-            const obj = { name: '库存数量', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.inventory_quantity'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'hand_barcode') {
-            const obj = { name: '手补条码', value: data[val] }
+            const obj = { name: 'barcode', value: data[val] }
             this.arr.push(obj)
           } else if (val === 'x') {
-            const obj = { name: 'X坐标', value: data[val] }
+            const obj = { name: 'X', value: data[val] }
             this.arr.push(obj)
           } else if (val === 'y') {
-            const obj = { name: 'Y坐标', value: data[val] }
+            const obj = { name: 'Y', value: data[val] }
             this.arr.push(obj)
           } else if (val === 'angle') {
-            const obj = { name: '角度', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.angle'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'electricity') {
-            const obj = { name: '电量', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.electric_quantity'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'status_name') {
-            const obj = { name: '状态', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.status'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'fault') {
-            const obj = { name: '异常', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.abnormal'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'map_id') {
-            const obj = { name: '楼层', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.floor'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'power') {
-            const obj = { name: '电量', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.electric_quantity'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'pallet') {
-            const obj = { name: '托盘', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.tray'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'load') {
-            const obj = { name: '有无货', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.loading_or_not'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'alarm') {
-            const obj = { name: '报警', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.alarm'), value: data[val] }
             this.arr.push(obj)
           } else if (val === 'task_id') {
-            const obj = { name: '任务号', value: data[val] }
+            const obj = { name: i18n.t('monitor.click.task_number'), value: data[val] }
             this.arr.push(obj)
           }
         }