diff --git a/acs2/nladmin-system/nlsso-server/src/main/java/org/nl/acs/ext/wms/service/impl/WmsToAcsServiceImpl.java b/acs2/nladmin-system/nlsso-server/src/main/java/org/nl/acs/ext/wms/service/impl/WmsToAcsServiceImpl.java
index 70746a245..c6f6d8028 100644
--- a/acs2/nladmin-system/nlsso-server/src/main/java/org/nl/acs/ext/wms/service/impl/WmsToAcsServiceImpl.java
+++ b/acs2/nladmin-system/nlsso-server/src/main/java/org/nl/acs/ext/wms/service/impl/WmsToAcsServiceImpl.java
@@ -256,6 +256,7 @@ public class WmsToAcsServiceImpl implements WmsToAcsService {
                     route_plan_code = "normal";
                 }
 
+                // todo: 通过扩展（需要做成可以定义开发，比如说这里是个统一handle类，然后具体子类实现操作，通过判断类型去执行）
                 if (StrUtil.equals(task_type, "5")) {
                     Device device = deviceAppService.findDeviceByCode(next_device_code);
                     SiemensConveyorDeviceDriver siemensConveyorDeviceDriver;
@@ -321,6 +322,7 @@ public class WmsToAcsServiceImpl implements WmsToAcsService {
                     continue;
                 }
 
+                // 组装参数保存数据库
                 JSONObject jo = new JSONObject();
                 jo.put("task_id", IdUtil.simpleUUID());
                 jo.put("task_code", task_code);
diff --git a/lms/nladmin-system/src/main/java/org/nl/b_lms/pda/controller/SlitterPdaController.java b/lms/nladmin-system/src/main/java/org/nl/b_lms/pda/controller/SlitterPdaController.java
index 69d9863c6..1ba903097 100644
--- a/lms/nladmin-system/src/main/java/org/nl/b_lms/pda/controller/SlitterPdaController.java
+++ b/lms/nladmin-system/src/main/java/org/nl/b_lms/pda/controller/SlitterPdaController.java
@@ -329,5 +329,29 @@ public class SlitterPdaController {
     public ResponseEntity<Object> seeTaskByPoint(@RequestBody JSONObject param) {
         return new ResponseEntity<>(slitterService.seeTaskByPoint(param), HttpStatus.OK);
     }
+    @PostMapping("/list-xn-area")
+    @Log("获取区域虚拟位置下拉框")
+    @SaIgnore
+    public ResponseEntity<Object> getXnAreaListByArea(@RequestBody JSONObject param) {
+        return new ResponseEntity<>(slitterService.getXnAreaListByArea(param), HttpStatus.OK);
+    }
+    @PostMapping("/bind-xn-plan")
+    @Log("绑定虚拟计划")
+    @SaIgnore
+    public ResponseEntity<Object> bindXnPlan(@RequestBody JSONObject param) {
+        return new ResponseEntity<>(slitterService.bindXnPlan(param), HttpStatus.OK);
+    }
+    @PostMapping("/get-unbind-plan")
+    @Log("待绑定虚拟计划")
+    @SaIgnore
+    public ResponseEntity<Object> getUnbindPlan(@RequestBody JSONObject param) {
+        return new ResponseEntity<>(slitterService.getUnbindPlan(param), HttpStatus.OK);
+    }
+    @PostMapping("/do-bind-plan-device")
+    @Log("待绑定虚拟计划")
+    @SaIgnore
+    public ResponseEntity<Object> doBindPlanDevice(@RequestBody JSONObject param) {
+        return new ResponseEntity<>(slitterService.doBindPlanDevice(param), HttpStatus.OK);
+    }
 
 }
diff --git a/lms/nladmin-system/src/main/java/org/nl/b_lms/pda/controller/vo/MergeAreaSelectVO.java b/lms/nladmin-system/src/main/java/org/nl/b_lms/pda/controller/vo/MergeAreaSelectVO.java
new file mode 100644
index 000000000..ff0ac16be
--- /dev/null
+++ b/lms/nladmin-system/src/main/java/org/nl/b_lms/pda/controller/vo/MergeAreaSelectVO.java
@@ -0,0 +1,16 @@
+package org.nl.b_lms.pda.controller.vo;
+
+import lombok.Data;
+
+/**
+ * 合单区域下拉框
+ * @Author: liyongde
+ * @Date: 2026/7/30 18:00
+ */
+@Data
+public class MergeAreaSelectVO {
+
+    private String label;
+
+    private String value;
+}
diff --git a/lms/nladmin-system/src/main/java/org/nl/b_lms/pdm/bi/slittingproductionplan/service/IPdmBiSlittingproductionplanService.java b/lms/nladmin-system/src/main/java/org/nl/b_lms/pdm/bi/slittingproductionplan/service/IPdmBiSlittingproductionplanService.java
index 81828f5bc..ec9758669 100644
--- a/lms/nladmin-system/src/main/java/org/nl/b_lms/pdm/bi/slittingproductionplan/service/IPdmBiSlittingproductionplanService.java
+++ b/lms/nladmin-system/src/main/java/org/nl/b_lms/pdm/bi/slittingproductionplan/service/IPdmBiSlittingproductionplanService.java
@@ -170,4 +170,6 @@ public interface IPdmBiSlittingproductionplanService extends IService<PdmBiSlitt
      * @return
      */
     Integer getSameTripParentContainerPlanCount(PdmBiSlittingproductionplan demoPlan);
+
+    List<PdmBiSlittingproductionplan> getCurrentDayListByDevice(String deviceCode);
 }
diff --git a/lms/nladmin-system/src/main/java/org/nl/b_lms/pdm/bi/slittingproductionplan/service/dao/mapper/PdmBiSlittingproductionplanMapper.xml b/lms/nladmin-system/src/main/java/org/nl/b_lms/pdm/bi/slittingproductionplan/service/dao/mapper/PdmBiSlittingproductionplanMapper.xml
index eaca01c72..ec7d150b5 100644
--- a/lms/nladmin-system/src/main/java/org/nl/b_lms/pdm/bi/slittingproductionplan/service/dao/mapper/PdmBiSlittingproductionplanMapper.xml
+++ b/lms/nladmin-system/src/main/java/org/nl/b_lms/pdm/bi/slittingproductionplan/service/dao/mapper/PdmBiSlittingproductionplanMapper.xml
@@ -183,7 +183,7 @@
                p.manufacture_sort,
                p.qzz_size,
                p.qzz_generation,
-               MIN(p.start_time) AS start_time
+               MIN(p.call_time) AS start_time
         FROM `pdm_bi_slittingproductionplan` p
         WHERE p.`status` = '01'
           AND p.is_child_tz_ok = '0'
@@ -191,9 +191,9 @@
           AND p.is_delete = '0'
           AND IFNULL(p.up_or_down, '') <![CDATA[ <> ]]> ''
           AND IFNULL(p.left_or_right, '') <![CDATA[ <> ]]> ''
-          AND DATE ( p.start_time ) >= DATE_SUB( CURDATE()
+          AND DATE ( p.call_time ) >= DATE_SUB( CURDATE()
             , INTERVAL #{day} DAY )
-          AND p.container_name LIKE '%虚拟-B%'
+          AND p.container_name LIKE 'Z虚拟B%'
           AND '1' = ( SELECT c.is_used FROM st_ivt_cutpointivt c WHERE c.ext_code = p.resource_name )
         GROUP BY
             p.resource_name,
@@ -204,8 +204,7 @@
             p.manufacture_sort,
             p.qzz_size,
             p.qzz_generation
-        order by p.qzz_size,
-            p.manufacture_sort desc,
+        order by p.manufacture_sort desc,
             p.start_time
     </select>
     <select id="getCountXN" resultType="java.lang.Integer">
diff --git a/lms/nladmin-system/src/main/java/org/nl/b_lms/pdm/bi/slittingproductionplan/service/impl/PdmBiSlittingproductionplanServiceImpl.java b/lms/nladmin-system/src/main/java/org/nl/b_lms/pdm/bi/slittingproductionplan/service/impl/PdmBiSlittingproductionplanServiceImpl.java
index 3b8de5d4f..6261615bb 100644
--- a/lms/nladmin-system/src/main/java/org/nl/b_lms/pdm/bi/slittingproductionplan/service/impl/PdmBiSlittingproductionplanServiceImpl.java
+++ b/lms/nladmin-system/src/main/java/org/nl/b_lms/pdm/bi/slittingproductionplan/service/impl/PdmBiSlittingproductionplanServiceImpl.java
@@ -25,7 +25,6 @@ import org.nl.modules.common.exception.BadRequestException;
 import org.springframework.beans.factory.annotation.Autowired;
 import org.springframework.stereotype.Service;
 
-import java.util.Collections;
 import java.util.List;
 import java.util.Map;
 import java.util.Set;
@@ -257,6 +256,16 @@ public class PdmBiSlittingproductionplanServiceImpl extends ServiceImpl<PdmBiSli
         return count(lam);
     }
 
+    @Override
+    public List<PdmBiSlittingproductionplan> getCurrentDayListByDevice(String deviceCode) {
+        LambdaQueryWrapper<PdmBiSlittingproductionplan> lam = new LambdaQueryWrapper<>();
+        lam.eq(PdmBiSlittingproductionplan::getResource_name, deviceCode)
+                .eq(PdmBiSlittingproductionplan::getIs_delete, "0")
+                .apply("DATE(call_time) >= DATE_SUB(CURDATE(), INTERVAL 1 DAY)")
+                .orderByAsc(PdmBiSlittingproductionplan::getCall_time, PdmBiSlittingproductionplan::getStatus);
+        return list(lam);
+    }
+
     @Override
     public int getCountXN(String area, String location) {
         return pdmBiSlittingproductionplanMapper.getCountXN(area, location);
diff --git a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/SlitterDownNewTrussTask.java b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/SlitterDownNewTrussTask.java
index b266c8196..b76f9147b 100644
--- a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/SlitterDownNewTrussTask.java
+++ b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/SlitterDownNewTrussTask.java
@@ -262,9 +262,7 @@ public class SlitterDownNewTrussTask extends AbstractAcsTask {
     public List<PdmBiSlittingproductionplan> updateDownRollPlan(JSONObject requestParam) {
         // 下来的分切计划状态：06 -> 09, 不在需要设置重量
         JSONArray downContainers = requestParam.getJSONArray("down_roll");
-        List<String> downCons = downContainers.stream()
-                .map(obj -> ((JSONObject) obj).getString("container_name"))
-                .collect(Collectors.toList());
+        List<String> downCons = downContainers.toJavaList(String.class);
         log.info("即将下卷的上下轴的子卷号数据：{}", downCons);
         List<PdmBiSlittingproductionplan> downPlans = slittingproductionplanService.getByContainerNames(downCons);
         // 下来的卷的集合
diff --git a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/TrussDisassemblyCacheTask.java b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/TrussDisassemblyCacheTask.java
index e8634da81..72e38a652 100644
--- a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/TrussDisassemblyCacheTask.java
+++ b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/TrussDisassemblyCacheTask.java
@@ -140,13 +140,13 @@ public class TrussDisassemblyCacheTask extends AbstractAcsTask {
             Deliverycachepointivt endPointObj = deliverycachepointivtService.getPintByCode(endPoint, false);
             Deliverycachepointivt endPointObj2 = deliverycachepointivtService.getPintByCode(endPoint2, false);
             endPointObj.setQzzno(task.getVehicle_code());
-            endPointObj.setPoint_status("02");
+            endPointObj.setPoint_status("05");
             TaskUtils.updateOptMessageByCachePoint(endPointObj);
             deliverycachepointivtService.updateById(endPointObj);
 
             if (endPointObj2 != null) {
                 endPointObj2.setQzzno(task.getVehicle_code2());
-                endPointObj2.setPoint_status("02");
+                endPointObj2.setPoint_status("05");
                 TaskUtils.updateOptMessageByCachePoint(endPointObj2);
                 deliverycachepointivtService.updateById(endPointObj2);
             }
diff --git a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/UpShaftTrussNewTask.java b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/UpShaftTrussNewTask.java
index 99ce563df..ae03e2d57 100644
--- a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/UpShaftTrussNewTask.java
+++ b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/UpShaftTrussNewTask.java
@@ -136,7 +136,7 @@ public class UpShaftTrussNewTask extends AbstractAcsTask {
             String pointCode2 = task.getPoint_code2();
             StIvtCutpointivt point2 = cutpointivtService.getPintByUpOrDownCode(pointCode2, false);
             // 可能不存在
-            String pointCode3 = task.getPoint_code1();
+            String pointCode3 = task.getPoint_code3();
             Deliverycachepointivt point3 = deliverycachepointivtService.getOneByPointCode(pointCode3, false);
 
             // 交换数据
@@ -181,10 +181,13 @@ public class UpShaftTrussNewTask extends AbstractAcsTask {
             point1.setQzzno("");
             point1.setPoint_status("01");
             TaskUtils.updateOptMessageByCachePoint(point1);
-            point3.setQzzno("");
-            point3.setPoint_status("01");
-            TaskUtils.updateOptMessageByCachePoint(point3);
-            deliverycachepointivtService.updateBatchById(Stream.of(point1, point3).collect(Collectors.toList()));
+            deliverycachepointivtService.updateById(point1);
+            if (ObjectUtil.isNotEmpty(point3)) {
+                point3.setQzzno("");
+                point3.setPoint_status("01");
+                TaskUtils.updateOptMessageByCachePoint(point3);
+                deliverycachepointivtService.updateById(point3);
+            }
         }
         // 取消
         if (status.equals(IOSEnum.IS_NOTANDYES.code("否"))) {
diff --git a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/auto/AutoCallAirShaftTask.java b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/auto/AutoCallAirShaftTask.java
index 4bfd025a7..3dedcfa7f 100644
--- a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/auto/AutoCallAirShaftTask.java
+++ b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/auto/AutoCallAirShaftTask.java
@@ -112,7 +112,9 @@ public class AutoCallAirShaftTask extends Prun {
     public final static String TZ_DAY = "TZ_DAY";
     public final static String USE_XN = "USE_XN";
     public final static String BZ_CHECK_EMPTY = "BZ_CHECK_EMPTY";
-    /** 合单配送 */
+    /**
+     * 合单配送
+     */
     public final static String IS_COMBINED_ORDER = "IS_COMBINED_ORDER";
     public List<String> stepErrorInfo = new ArrayList<>();
     @Autowired
@@ -129,7 +131,7 @@ public class AutoCallAirShaftTask extends Prun {
      */
     public void run() {
         RLock lock = redissonClient.getLock("TestTask");
-        boolean tryLock = false;
+        boolean tryLock;
         try {
             tryLock = lock.tryLock(0, TimeUnit.SECONDS);
         } catch (InterruptedException e) {
@@ -185,11 +187,18 @@ public class AutoCallAirShaftTask extends Prun {
         // 过滤
         String value = paramObj.getValue();
         List<String> prefixList = Arrays.asList(value.split("[，,]"));
-        List<SlitterPlanDistinctDto> plans = planAll.stream()
-                .filter(p -> prefixList.stream()
-                        .anyMatch(prefix -> p.getResource_name().startsWith(prefix)) &&
-                        checkComputationPoint(p, empty) && checkHasTask(p))
-                .collect(Collectors.toList());
+        List<SlitterPlanDistinctDto> plans;
+
+        // 虚拟计划不需要过滤
+        if (ObjectUtil.isNotEmpty(useXn) && "1".equals(useXn.getValue())) {
+            plans = planAll;
+        } else {
+            plans = planAll.stream()
+                    .filter(p -> prefixList.stream()
+                            .anyMatch(prefix -> p.getResource_name().startsWith(prefix)) &&
+                            checkComputationPoint(p, empty) && checkHasTask(p))
+                    .collect(Collectors.toList());
+        }
         log.info("SQL查询后过滤区域、是否有套过轴的数据：{}", plans);
         if (plans.size() == 0) {
             stepErrorInfo.add("找不到需要套轴的信息，只做拔轴。");
@@ -282,7 +291,6 @@ public class AutoCallAirShaftTask extends Prun {
             log.info("找到对应的另一半的计划 - {}", plans);
         }
         // 获取一个分切计划的Dto。如果是6寸，可以直接使用、如果是3寸，需要判断当前位置是否满足
-        // todo: 需要校验分切设备是在对应的区域中
         SlitterPlanDistinctDto planDto = plans.stream()
                 .filter(planD -> ("6".equals(planD.getQzz_size()) ||
                         ("3".equals(planD.getQzz_size()) && specification.equals(planD.getQzz_generation()))) &&
@@ -1259,6 +1267,7 @@ public class AutoCallAirShaftTask extends Prun {
                 return true;
             }
             // 检测 todo: 可以优化考虑任务,但似乎没太大作用
+            // 检测缓存架子的点位是否够用
             Integer num = iDeliverycachepointivtService.countPendingUseByDevice(dto.getResource_name());
             if (num == 0) {
                 return true;
diff --git a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/auto/AutoSendAirShaftAgvTask.java b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/auto/AutoSendAirShaftAgvTask.java
index f0ff8d3c8..72c11c6b7 100644
--- a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/auto/AutoSendAirShaftAgvTask.java
+++ b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/auto/AutoSendAirShaftAgvTask.java
@@ -44,7 +44,7 @@ public class AutoSendAirShaftAgvTask {
     /** 合单配送 */
     public final static String IS_COMBINED_ORDER = "IS_COMBINED_ORDER";
     /** 合单超时时间 */
-    public final static String IS_COMBINED_ORDER_TIME = "IS_COMBINED_ORDER_TIME";
+    public final static String IS_COMBINED_ORDER_TIME = "IS_COMBINED_TIME";
     @Autowired
     private IBstIvtCutpointivtService bcutpointivtService;
     @Autowired
diff --git a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/mapper/SlitterMapper.xml b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/mapper/SlitterMapper.xml
index 191df8d89..ef02331d0 100644
--- a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/mapper/SlitterMapper.xml
+++ b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/mapper/SlitterMapper.xml
@@ -386,7 +386,7 @@
                                 AND p.qzzno = sd.qzzno
         WHERE sd.product_area = #{product_area}
           AND sd.point_location = #{point_location}
-          AND sd.point_status = '02'
+          AND sd.point_status = '03'
           AND sd.point_type = '02'
           AND sd.is_used = '1'
           AND NOT EXISTS (SELECT 1
@@ -474,7 +474,7 @@
         FROM `st_ivt_deliverycachepointivt` sd
         WHERE sd.product_area = #{product_area}
           AND sd.point_location = #{point_location}
-          AND sd.point_status = '02'
+          AND sd.point_status = '03'
           AND EXISTS (SELECT 1
                       FROM pdm_bi_slittingproductionplan p
                       WHERE p.qzzno = sd.qzzno
diff --git a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/service/SlitterService.java b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/service/SlitterService.java
index 42992099f..3bc85a32c 100644
--- a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/service/SlitterService.java
+++ b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/service/SlitterService.java
@@ -3,6 +3,7 @@ package org.nl.b_lms.sch.tasks.slitter.service;
 import com.alibaba.fastjson.JSONArray;
 import com.alibaba.fastjson.JSONObject;
 import org.nl.b_lms.bst.ivt.cutpointivt.service.dao.BstIvtCutpointivt;
+import org.nl.b_lms.pda.controller.vo.MergeAreaSelectVO;
 import org.nl.b_lms.sch.task.dao.SchBaseTask;
 import org.nl.b_lms.sch.tasks.slitter.mapper.dto.CallPlanViewVO;
 import org.springframework.http.ResponseEntity;
@@ -411,4 +412,12 @@ public interface SlitterService {
     JSONObject getTubeVehicleInfo(JSONObject param);
 
     List<SchBaseTask> seeTaskByPoint(JSONObject param);
+
+    List<MergeAreaSelectVO> getXnAreaListByArea(JSONObject param);
+
+    JSONObject bindXnPlan(JSONObject param);
+
+    List<MergeAreaSelectVO> getUnbindPlan(JSONObject param);
+
+    JSONObject doBindPlanDevice(JSONObject param);
 }
diff --git a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/service/impl/SlitterServiceImpl.java b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/service/impl/SlitterServiceImpl.java
index 95b09c0f0..c21b3a5b6 100644
--- a/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/service/impl/SlitterServiceImpl.java
+++ b/lms/nladmin-system/src/main/java/org/nl/b_lms/sch/tasks/slitter/service/impl/SlitterServiceImpl.java
@@ -6,6 +6,7 @@ import cn.hutool.core.date.DateUtil;
 import cn.hutool.core.lang.Assert;
 import cn.hutool.core.util.StrUtil;
 import com.baomidou.mybatisplus.core.conditions.query.QueryWrapper;
+import org.nl.b_lms.pda.controller.vo.MergeAreaSelectVO;
 import org.nl.b_lms.sch.tasks.slitter.util.MdmDescriptionParseUtils;
 import org.nl.b_lms.sch.point.dao.mapper.StIvtCutpointivtMapper;
 import org.nl.b_lms.sch.tasks.SlitterDownNewTrussTask;
@@ -71,8 +72,6 @@ import org.redisson.api.RedissonClient;
 import org.springframework.beans.factory.annotation.Autowired;
 import org.springframework.stereotype.Service;
 import org.springframework.transaction.annotation.Transactional;
-import org.springframework.transaction.support.TransactionSynchronization;
-import org.springframework.transaction.support.TransactionSynchronizationManager;
 
 import java.math.BigDecimal;
 import java.util.*;
@@ -431,7 +430,7 @@ public class SlitterServiceImpl implements SlitterService {
     @Transactional(rollbackFor = Exception.class)
     public JSONObject acsFinishLoadShaft(JSONObject param) {
         String msg = "";
-        JSONObject res = new JSONObject();
+        JSONObject res;
         // 穿拔轴位
         String deviceCode = param.getString("device_code");
         List<String> stepTipLogs = getRedisListValue("ERROR" + deviceCode);
@@ -479,6 +478,7 @@ public class SlitterServiceImpl implements SlitterService {
                     .collect(Collectors.toList());
 
             // 6. 尝试拼单
+//            Param xnParam = paramService.findByCode(USE_XN);
             String end_point = tryCombineOrder(demoPlan, deviceCode, startPoint, qzzNo);
             if (end_point == null) {
                 // 7. 正常业务流程（不拼单）
@@ -491,26 +491,8 @@ public class SlitterServiceImpl implements SlitterService {
             return res;
 
         } finally {
-            if (tryLock) {
-                // 使用 TransactionSynchronization 在事务提交后释放锁
-                // 避免锁释放但事务未提交导致的并发问题
-                if (TransactionSynchronizationManager.isSynchronizationActive()) {
-                    TransactionSynchronizationManager.registerSynchronization(new TransactionSynchronization() {
-                        @Override
-                        public void afterCompletion(int status) {
-                            try {
-                                lock.unlock();
-                                log.debug("分布式锁已在事务完成后释放: doAcsFinishLoadShaft, 事务状态: {}",
-                                        status == STATUS_COMMITTED ? "已提交" : "已回滚");
-                            } catch (Exception e) {
-                                log.error("释放分布式锁失败", e);
-                            }
-                        }
-                    });
-                } else {
-                    // 如果没有事务，直接释放锁
-                    lock.unlock();
-                }
+            if (lock.isLocked() && lock.isHeldByCurrentThread()) {
+                lock.unlock();
             }
         }
     }
@@ -739,7 +721,7 @@ public class SlitterServiceImpl implements SlitterService {
                 }
             }
         }
-        if (cutCachePointList.size() > 0) {
+        if (!cutCachePointList.isEmpty()) {
             // 如果在架子上 - 创建的是多条任务toCreateGroupDownRollTask
             List<String> qzzNos = cutCachePointList.stream().map(Deliverycachepointivt::getQzzno)
                     .filter(ObjectUtil::isNotEmpty).collect(Collectors.toList());
@@ -798,9 +780,13 @@ public class SlitterServiceImpl implements SlitterService {
                     // 下来的子卷的气胀轴编码
                     taskParam.put("vehicle_code2", demo2.getQzzno());
                     // 上去的子卷号
-                    taskParam.put("up_roll", nextUpPlan != null ? nextUpPlans : nextDownPlans);
+                    taskParam.put("up_roll", nextUpPlan != null
+                            ? nextUpPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList())
+                            : nextDownPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                     // 下来的子卷好
-                    taskParam.put("down_roll", currentUpPlan != null ? currentUpPlans : currentDownPlans);
+                    taskParam.put("down_roll", currentUpPlan != null
+                            ? currentUpPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList())
+                            : currentDownPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                     taskParam.put("to_Task1_Axis_Type", demo.getQzz_size());
                     break;
                 case "01":
@@ -825,9 +811,9 @@ public class SlitterServiceImpl implements SlitterService {
                         // 下来的子卷的气胀轴编码
                         taskParam.put("vehicle_code2", currentUpPlan.getQzzno());
                         // 上去的子卷号
-                        taskParam.put("up_roll", nextUpPlans);
+                        taskParam.put("up_roll", nextUpPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                         // 下来的子卷好
-                        taskParam.put("down_roll", currentUpPlans);
+                        taskParam.put("down_roll", currentUpPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                         taskParam.put("flag", "1"); // 标记是上单下单的
                         taskParam.put("to_Task1_Axis_Type", nextUpPlan.getQzz_size());
 
@@ -838,7 +824,7 @@ public class SlitterServiceImpl implements SlitterService {
                         taskParam2.put("groupId", groupId);
                         // 上去的气胀轴编码
                         taskParam2.put("vehicle_code", nextDownPlan.getQzzno());
-                        taskParam2.put("up_roll", nextDownPlans);
+                        taskParam2.put("up_roll", nextDownPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                         taskParam2.put("flag", "3");
                         taskParam2.put("to_Task1_Axis_Type", nextDownPlan.getQzz_size());
                     }else {
@@ -854,9 +840,9 @@ public class SlitterServiceImpl implements SlitterService {
                         // 下来的子卷的气胀轴编码
                         taskParam.put("vehicle_code2", currentDownPlan.getQzzno());
                         // 上去的子卷号
-                        taskParam.put("up_roll", nextDownPlans);
+                        taskParam.put("up_roll", nextDownPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                         // 下来的子卷好
-                        taskParam.put("down_roll", currentDownPlans);
+                        taskParam.put("down_roll", currentDownPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                         taskParam.put("flag", "1"); // 标记是上单下单的
                         taskParam.put("to_Task1_Axis_Type", nextDownPlan.getQzz_size());
 
@@ -867,7 +853,7 @@ public class SlitterServiceImpl implements SlitterService {
                         taskParam2.put("groupId", groupId);
                         // 上去的气胀轴编码
                         taskParam2.put("vehicle_code", nextUpPlan.getQzzno());
-                        taskParam2.put("up_roll", nextUpPlans);
+                        taskParam2.put("up_roll", nextUpPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                         taskParam2.put("flag", "3");
                         taskParam2.put("to_Task1_Axis_Type", nextUpPlan.getQzz_size());
                     }
@@ -900,9 +886,9 @@ public class SlitterServiceImpl implements SlitterService {
                         // 下来的子卷的气胀轴编码
                         taskParam.put("vehicle_code2", currentUpPlan.getQzzno());
                         // 上去的子卷号
-                        taskParam.put("up_roll", nextUpPlans);
+                        taskParam.put("up_roll", nextUpPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                         // 下来的子卷好
-                        taskParam.put("down_roll", currentUpPlans);
+                        taskParam.put("down_roll", currentUpPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                         taskParam.put("flag", "1"); // 标记是上单下单的
                         taskParam.put("to_Task1_Axis_Type", nextUpPlan.getQzz_size());
                         // 单下
@@ -944,9 +930,9 @@ public class SlitterServiceImpl implements SlitterService {
                         // 下来的子卷的气胀轴编码
                         taskParam2.put("vehicle_code2", currentDownPlan.getQzzno());
                         // 上去的子卷号
-                        taskParam2.put("up_roll", nextDownPlans);
+                        taskParam2.put("up_roll", nextDownPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                         // 下来的子卷好
-                        taskParam2.put("down_roll", currentDownPlans);
+                        taskParam2.put("down_roll", currentDownPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                         taskParam2.put("flag", "1"); // 标记是上单下单的
                         taskParam2.put("to_Task1_Axis_Type", nextDownPlan.getQzz_size());
                     }
@@ -978,9 +964,9 @@ public class SlitterServiceImpl implements SlitterService {
                     // 下来的子卷的气胀轴编码
                     taskParam.put("vehicle_code2", currentUpPlan.getQzzno());
                     // 上去的子卷号
-                    taskParam.put("up_roll", nextUpPlans);
+                    taskParam.put("up_roll", nextUpPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                     // 下来的子卷好
-                    taskParam.put("down_roll", currentUpPlans);
+                    taskParam.put("down_roll", currentUpPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                     taskParam.put("to_Task1_Axis_Type", nextUpPlan.getQzz_size());
 
                     taskParam2.put("point_code1", ivtDown.getPoint_code());
@@ -997,9 +983,9 @@ public class SlitterServiceImpl implements SlitterService {
                     // 下来的子卷的气胀轴编码
                     taskParam2.put("vehicle_code2", currentDownPlan.getQzzno());
                     // 上去的子卷号
-                    taskParam2.put("up_roll", nextDownPlans);
+                    taskParam2.put("up_roll", nextDownPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                     // 下来的子卷好
-                    taskParam2.put("down_roll", currentDownPlans);
+                    taskParam2.put("down_roll", currentDownPlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                     taskParam2.put("to_Task1_Axis_Type", nextDownPlan.getQzz_size());
                     break;
                 default:
@@ -2671,16 +2657,15 @@ public class SlitterServiceImpl implements SlitterService {
             if (cutPointList.size() == 0 && cachePointList.size() == 0) {
                 tips.add("没有为设备[" + deviceCode + "]套好轴的位置!或者已经创建任务！");
             } else {
-                String collect = timePlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.joining("','"));
                 if (cutPointList.size() > 0){
+                    String collect = timePlans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.joining("','"));
                     // 找到该分切计划的点位
-                    BstIvtCutpointivt newCutPoint = cutPointList.get(0);
-                    tips.add("为设备[" + deviceCode + "]套好轴的位置在[" + newCutPoint.getPoint_code() + "], " +
+                    tips.add("为设备[" + deviceCode + "]套好轴的位置在[" + cutPointList.stream().map(BstIvtCutpointivt::getPoint_code).collect(Collectors.joining("','")) + "], " +
                             "对应的计划: " + collect);
                 } else {
-                    Deliverycachepointivt newCutPoint = cachePointList.get(0);
-                    tips.add("为设备[" + deviceCode + "]套好轴的位置在[" + newCutPoint.getPoint_code() + "], " +
-                            "对应的计划: " + collect);
+                    List<PdmBiSlittingproductionplan> pdmBiSlittingproductionplans = slittingproductionplanService.getByQzzNos(cachePointList.stream().map(Deliverycachepointivt::getQzzno).collect(Collectors.toList()));
+                    tips.add("为设备[" + deviceCode + "]套好轴的位置在[" + cachePointList.stream().map(Deliverycachepointivt::getPoint_code).collect(Collectors.joining("','")) + "], " +
+                            "对应的计划: " + pdmBiSlittingproductionplans.stream().map(PdmBiSlittingproductionplan::getContainer_name).collect(Collectors.toList()));
                 }
 
             }
@@ -3888,6 +3873,304 @@ public class SlitterServiceImpl implements SlitterService {
                         .like(SchBaseTask::getPoint_code4, data)));
     }
 
+    @Override
+    public List<MergeAreaSelectVO> getXnAreaListByArea(JSONObject param) {
+        String productArea = param.getString("area");
+
+        if (ObjectUtil.isEmpty(productArea)) {
+            return Collections.emptyList();
+        }
+
+        return cutpointivtService.list(new LambdaQueryWrapper<StIvtCutpointivt>()
+                        .eq(StIvtCutpointivt::getProduct_area, productArea)
+                        .like(StIvtCutpointivt::getPoint_code, "XN")
+                        .orderByAsc(StIvtCutpointivt::getSort_seq))
+                .stream()
+                .map(point -> {
+                    MergeAreaSelectVO vo = new MergeAreaSelectVO();
+                    vo.setLabel(point.getFull_point_code());
+                    vo.setValue(point.getPoint_code());
+                    return vo;
+                })
+                .collect(Collectors.toList());
+    }
+
+    @Override
+    public JSONObject bindXnPlan(JSONObject param) {
+        // param: area, device_code, up_left_size_k, up_right_size_k, up_left_size_v, up_right_size_v
+        // location, qzz_size, qzz_generation
+        // 虚拟设备：A1_XNFQ_01
+        String area = param.getString("area");
+        String device_code = param.getString("device_code");
+        Integer number = param.getInteger("qzz_num");
+        String qzz_generation = param.getString("qzz_generation");
+        StIvtCutpointivt xnDevice = cutpointivtService.getPintByPointCode(device_code, true);
+        if (ObjectUtil.isEmpty(xnDevice)) {
+            throw new BadRequestException("该半区的虚拟设备不存在或者已禁用!");
+        }
+        // mes的设备号
+        String deviceCode = xnDevice.getExt_code();
+        // todo: 判断位置是否够用
+//        // 判断还有没有位置（没有就不给创建）
+//        List<Deliverycachepointivt> canUsePoint = deliverycachepointivtService.list(new LambdaQueryWrapper<Deliverycachepointivt>()
+//                .eq(Deliverycachepointivt::getProduct_area, area)
+//                .eq(Deliverycachepointivt::getPoint_location, location)
+//                .eq(Deliverycachepointivt::getIs_used, "1")
+//                .eq(Deliverycachepointivt::getPoint_status, "01")
+//                .like(Deliverycachepointivt::getCan_size, qzz_size));
+//        // 获取当前区域、位置的分切计划
+//        int planCount = pdmBiSlittingproductionplanService.getCountXN(area, location);
+//        if (canUsePoint.size() < (number + planCount)) {
+//            throw new BadRequestException("该半区该尺寸类型的位置剩余【" + canUsePoint.size() + "】个");
+//        }
+        // 当前轴需要的管芯名称 ...
+        String upLeftSizeK = param.getString("up_left_size_k");
+        String upRightSizeK = param.getString("up_right_size_k");
+        String upLeftSizeV = param.getString("up_left_size_v");
+        String upRightSizeV = param.getString("up_right_size_v");
+        String upLeftQzzSize = MdmDescriptionParseUtils.extractCommonTubeSize(upLeftSizeK);
+        String upRightQzzSize = MdmDescriptionParseUtils.extractCommonTubeSize(upRightSizeK);
+        // 判断管芯的长度是否超出
+        if (ObjectUtil.isNotEmpty(upLeftSizeK) && ObjectUtil.isNotEmpty(upRightSizeK)) {
+            // 判断是否超过长度
+            Integer tubeLen1 = SlitterTaskUtil.getPaperLengthByCodeInt(upLeftSizeK);
+            Integer tubeLen2 = SlitterTaskUtil.getPaperLengthByCodeInt(upRightSizeK);
+            if (tubeLen1 + tubeLen2 > 1700) {
+                throw new BadRequestException("两个管芯相加长度超出轴长度，请检查！");
+            }
+            // 判断两边选择尺寸是否一致
+            if (!StrUtil.equals(upLeftQzzSize, upRightQzzSize)) {
+                throw new BadRequestException("同一根轴的管芯尺寸必须一致！");
+            }
+        }
+        // 判断是单管还是双管
+        Integer paperNum = (ObjectUtil.isNotEmpty(upLeftSizeK) && ObjectUtil.isNotEmpty(upRightSizeK)) ? 2 : 1;
+        List<PdmBiSlittingproductionplan> plans = new ArrayList<>();
+        // 虚拟计划
+        // 轴数量
+        for (int i = 0; i < number; i++) {
+            String parentContainer = area + "M虚拟" + i + TaskUtils.getDateTime("yyMMddHHmmss");
+            String now = DateUtil.now();
+            // 没根轴有多少管芯
+            for (int j = 0; j < paperNum; j++) {
+                PdmBiSlittingproductionplan plan = new PdmBiSlittingproductionplan();
+                plan.setWorkorder_id(IdUtil.getStringId());
+                // 公共部分插入
+                plan.setOrder_type("1");
+                plan.setContainer_name("Z虚拟" + area + i + TaskUtils.getDateTime("yyMMddHHmmss") + j);
+                plan.setProduct_name("220890200000001");
+                plan.setDescription("虚拟卷");
+                plan.setParent_container_name(parentContainer);
+                plan.setRestruct_container_name("");
+                plan.setWare_house("1");
+                plan.setResource_name(deviceCode);
+                plan.setSplit_group("A");
+                plan.setManufacture_sort("P1");
+                plan.setMfg_order_name("-");
+                plan.setManufacture_date(DateUtil.format(DateUtil.date(), "yyyy-MM-dd"));
+                plan.setSplit_breadth(new BigDecimal("999"));
+                plan.setSplit_height(new BigDecimal("999"));
+                plan.setSplit_weight(new BigDecimal("999"));
+                plan.setStart_time(now);
+                plan.setEnd_time("");
+                plan.setStatus("01");
+                plan.setIs_parent_ok("0");
+                plan.setIs_child_tz_ok("0");
+                plan.setIs_child_ps_ok("0");
+                plan.setPaper_weight("0");
+                plan.setQzzno("");
+                plan.setIs_delete("0");
+                plan.setSale_order_name("-");
+                plan.setIs_call("1");
+                plan.setCall_time(now);
+                plan.setIs_paper_ok("1");
+                plan.setFRP_model("");
+                plan.setFRP_material("");
+                plan.setFRP_description("");
+                plan.setPaper_tube_model("");
+                plan.setPaper_tube_material("");
+                plan.setPaper_tube_description("");
+                plan.setUpdate_optid(SecurityUtils.getCurrentUserId());
+                plan.setUpdate_optname(SecurityUtils.getCurrentNickName());
+                plan.setUpdate_time(DateUtil.now());
+                plan.setQzz_generation(qzz_generation);
+                // 特殊数据
+                // 区分位置创建
+                if (ObjectUtil.isNotEmpty(upLeftSizeK) && j == 0) {
+                    boolean frp = upLeftSizeK.contains("FRP");
+                    // 上左
+                    //设置是纸管还是frp管
+                    plan.setQzz_size(upLeftQzzSize);
+                    if (frp) {
+                        plan.setPaper_tube_or_FRP("2");
+                        plan.setPaper_tube_material(upLeftSizeV);
+                        plan.setPaper_tube_model(upLeftSizeK);
+                        plan.setPaper_tube_description(upLeftSizeK);
+                    } else {
+                        plan.setPaper_tube_or_FRP("1");
+                        plan.setFRP_material(upLeftSizeV);
+                        plan.setFRP_model(upLeftSizeK);
+                        plan.setFRP_description(upLeftSizeK);
+                    }
+                    plan.setUp_or_down("1");
+                    plan.setLeft_or_right("1");
+                }
+                if ( ObjectUtil.isNotEmpty(upRightSizeK) && j == 1) {
+                    // 上右
+                    boolean frp = upRightSizeK.contains("FRP");
+                    plan.setQzz_size(upRightQzzSize);
+                    if (frp) {
+                        plan.setPaper_tube_or_FRP("2");
+                        plan.setPaper_tube_material(upRightSizeV);
+                        plan.setPaper_tube_model(upRightSizeK);
+                        plan.setPaper_tube_description(upRightSizeK);
+                    } else {
+                        plan.setPaper_tube_or_FRP("1");
+                        plan.setFRP_material(upRightSizeV);
+                        plan.setFRP_model(upRightSizeK);
+                        plan.setFRP_description(upRightSizeK);
+                    }
+                    plan.setUp_or_down("1");
+                    plan.setLeft_or_right("2");
+                }
+                plans.add(plan);
+            }
+        }
+        slittingproductionplanService.saveBatch(plans);
+        JSONObject res = new JSONObject();
+        res.put("status", HttpStatus.HTTP_OK);
+        res.put("plans", plans);
+        res.put("message", "呼叫送轴成功!");
+        return res;
+    }
+
+    @Override
+    public List<MergeAreaSelectVO> getUnbindPlan(JSONObject param) {
+        String deviceCode = param.getString("deviceCode");
+
+        List<PdmBiSlittingproductionplan> list =
+                slittingproductionplanService.getCurrentDayListByDevice(deviceCode);
+        return list.stream()
+                .map(point -> {
+                    MergeAreaSelectVO vo = new MergeAreaSelectVO();
+                    vo.setLabel(point.getContainer_name());
+                    vo.setValue(point.getContainer_name());
+                    return vo;
+                })
+                .collect(Collectors.toList());
+    }
+
+    @Override
+    @Transactional(rollbackFor = Exception.class)
+    public JSONObject doBindPlanDevice(JSONObject param) {
+        log.info("{} 操作绑定分切计划与气胀轴，请求参数：{}", SecurityUtils.getCurrentNickName(), param.toJSONString());
+        String upShelf = param.getString("upShelf");
+        String upPlanCode = param.getString("upPlanCode");
+        String downShelf = param.getString("downShelf");
+        String downPlanCode = param.getString("downPlanCode");
+        String force = param.getString("force");
+        String device = param.getString("device");
+        if (upPlanCode.equals(downPlanCode)) {
+            throw new BadRequestException("不能绑定相同的两个计划");
+        }
+        if (ObjectUtil.isNotEmpty(upShelf)) {
+            doBindNewPlanInfo(upShelf, upPlanCode, force, device);
+        }
+        if (ObjectUtil.isNotEmpty(downShelf)) {
+            doBindNewPlanInfo(downShelf, downPlanCode, force, device);
+        }
+        JSONObject res = new JSONObject();
+        res.put("status", HttpStatus.HTTP_OK);
+        res.put("message", "绑定成功!");
+        return res;
+    }
+
+    /** 绑定新计划信息 */
+    private void doBindNewPlanInfo(String shelfCode, String containerName, String force, String device) {
+        Deliverycachepointivt shelf = deliverycachepointivtService.getPintByCode(shelfCode, true);
+        StIvtCutpointivt cutDevice = cutpointivtService.getPintByExtCode(device, false);
+        if (ObjectUtil.isNotEmpty(shelf)) {
+            if (!"05".equals(shelf.getPoint_status())) {
+                throw new BadRequestException("点位" + shelfCode + "已经绑定过分切计划");
+            }
+            if (!shelf.getProduct_area().equals(cutDevice.getProduct_area()) || !shelf.getPlan().equals(cutDevice.getPlan())) {
+                throw new BadRequestException("分切机的区域与架子不在同一个子区域!");
+            }
+            List<PdmBiSlittingproductionplan> qzzs = slittingproductionplanService.getByQzzNoNotDeleted(shelf.getQzzno());
+            log.info("{} 架子的气胀轴信息：{}", shelfCode, JSONObject.toJSONString(qzzs));
+            PdmBiSlittingproductionplan planOne = slittingproductionplanService.getByContainerName(containerName);
+            if (ObjectUtil.isEmpty(planOne)) {
+                throw new BadRequestException("子卷：" + containerName + " 计划信息不存在！");
+            }
+            if (ObjectUtil.isNotEmpty(planOne.getQzzno())) {
+                // 判断是不是绑定过的，就查一下这个气胀轴编码在缓存架子上存不存在
+                List<Deliverycachepointivt> list = deliverycachepointivtService.list(new LambdaQueryWrapper<Deliverycachepointivt>()
+                        .eq(Deliverycachepointivt::getQzzno, planOne.getQzzno()));
+                if (!list.isEmpty()) {
+                    throw new BadRequestException("子卷：" + containerName + "已经绑定过气胀轴");
+                }
+            }
+            String resourceName = planOne.getResource_name();
+            List<PdmBiSlittingproductionplan> list = slittingproductionplanService.list(new LambdaQueryWrapper<PdmBiSlittingproductionplan>()
+                    .eq(PdmBiSlittingproductionplan::getParent_container_name, planOne.getParent_container_name())
+                    .eq(PdmBiSlittingproductionplan::getResource_name, resourceName)
+                    .eq(PdmBiSlittingproductionplan::getSplit_group, planOne.getSplit_group())
+                    .eq(PdmBiSlittingproductionplan::getUp_or_down, planOne.getUp_or_down()));
+            if (!"1".equals(force)) {
+                // 如果不强制绑定，就需要判断轴的规格对不对
+                if (qzzs.size() != list.size()) {
+                    throw new BadRequestException("轴的卷数不匹配，不允许绑定！");
+                }
+                for (int i = 0; i < list.size(); i++) {
+                    PdmBiSlittingproductionplan needPlan = list.get(i);
+                    for (PdmBiSlittingproductionplan qzz : qzzs) {
+                        if (qzz.getLeft_or_right().equals(needPlan.getLeft_or_right())) {
+                            if (needPlan.getPaper_tube_or_FRP().equals("1")) {
+                                // 纸管
+                                if (!needPlan.getPaper_tube_material().equals(qzz.getPaper_tube_material())) {
+                                    throw new BadRequestException("管芯不匹配，无法绑定!");
+                                }
+                            } else {
+                                if (!needPlan.getFRP_material().equals(qzz.getFRP_material())) {
+                                    throw new BadRequestException("管芯不匹配，无法绑定!");
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+
+            String qzzNo = resourceName.substring(0, 2)
+                    + resourceName.substring(resourceName.length() - 2)
+                    + list.get(0).getSplit_group()
+                    + TaskUtils.getDateTime("yyMMddHHmmss") + "-"
+                    + list.get(0).getUp_or_down();
+            // 绑定气胀轴和纸管重量
+            list.forEach(plan -> {
+                plan.setQzzno(qzzNo);
+                for (int i = 0; i < qzzs.size(); i++) {
+                    PdmBiSlittingproductionplan shelfQzz = qzzs.get(i);
+                    if (plan.getLeft_or_right().equals(shelfQzz.getLeft_or_right())) {
+                        plan.setPaper_weight(shelfQzz.getPaper_weight());
+                    }
+                }
+                plan.setIs_call("1");
+                plan.setStatus("03");
+                plan.setUpdate_time(DateUtil.now());
+                plan.setUpdate_optid(SecurityUtils.getCurrentUserId());
+                plan.setUpdate_optname(SecurityUtils.getCurrentNickName());
+            });
+            slittingproductionplanService.updateBatchById(list);
+            slittingproductionplanService.deleteAll(qzzs.stream().map(PdmBiSlittingproductionplan::getWorkorder_id).collect(Collectors.toSet()));
+            shelf.setQzzno(qzzNo);
+            shelf.setPoint_status("03");
+            shelf.setUpdate_optid(SecurityUtils.getCurrentUserId());
+            shelf.setUpdate_optname(SecurityUtils.getCurrentNickName());
+            shelf.setUpdate_time(DateUtil.now());
+            deliverycachepointivtService.updateById(shelf);
+        }
+    }
+
     public List<String> getRedisListValue(String key) {
         List<String> stepTipLogs = (List<String>) redisUtils.get(key);
         if (CollectionUtil.isEmpty(stepTipLogs)) {
@@ -4073,7 +4356,7 @@ public class SlitterServiceImpl implements SlitterService {
 
 
         //
-        List<BstIvtCutpointivt> emptyNotTaskPoint = new ArrayList<>();
+        List<BstIvtCutpointivt> emptyNotTaskPoint;
         if (StrUtil.isEmpty(end_point)) {
             //如果找不到可以没有正在执行任务的点，就找一个新的点
             emptyNotTaskPoint = slitterMapper.getCombinedOrders(