diff --git a/locale/en-1.json b/locale/en-1.json
index fc0251b..c570568 100644
--- a/locale/en-1.json
+++ b/locale/en-1.json
@@ -26,6 +26,8 @@
 	"button.emptydiskrecycle": "Empty disk recycle",
 	"button.upperfullroll": "Upper Full roll",
 	"button.weigh-check": "Weigh check",
+	"button.close": "Close",
+	"button.urgent": "Urgent",
 	"filter.bill-code": "Bill code",
 	"filter.warehouse": "Warehouse",
 	"filter.woodenbox": "Woodenbox",
@@ -85,8 +87,21 @@
 	"grid.areaname": "Area name",
 	"grid.signnum": "Allocated quantity",
 	"grid.woodenboxcode": "Woodenbox code",
+	"grid.prepare-set-shaft": "Prepare to set the shaft",
+	"grid.delivery-in-progress": "Delivery in progress",
+	"grid.delivery-completed": "Delivery completed",
+	"grid.completed": "Completed",
+	"toast.confirm-whether-clear-pointdata": "Confirm whether to clear the point data?",
+	"toast.confirm-bind-sub-roll": "Are you sure to bind the sub volume?",
+	"toast.confirm-bind-inflation-axis": "Confirm if the inflation axis is bound?",
+	"toast.confirm-create-AGV-task-to-inner-room": "Confirm whether to create an AGV task to be sent to inner packaging room?",
+	"toast.confirm-call-truss-inflation-axis": "Are you sure to call the inflation axis on the truss?",
 	"select.uppershaft": "Upper shaft",
 	"select.lowershaft": "Lower shaft",
 	"select.leftroll": "Left roll",
-	"select.rightroll": "Right roll"
+	"select.rightroll": "Right roll",
+	"select.3c4d": "3-inch 4th generation",
+	"select.3c5d": "3-inch 5th generation",
+	"select.6c4d": "6-inch 4th generation",
+	"select.6c5d": "6-inch 5th generation"
 }
\ No newline at end of file
diff --git a/locale/id-1.json b/locale/id-1.json
index 6f487d5..3a20e1e 100644
--- a/locale/id-1.json
+++ b/locale/id-1.json
@@ -26,6 +26,8 @@
 	"button.emptydiskrecycle": "Daur Ulang Disk Kosong",
 	"button.upperfullroll": "Penuh",
 	"button.weigh-check": "Verifikasi bobot",
+	"button.close": "Tutup",
+	"button.urgent": "Cepat!",
 	"filter.bill-code": "Kode dokumen",
 	"filter.warehouse": "gudang",
 	"filter.woodenbox": "Kotak kayu",
@@ -83,8 +85,21 @@
 	"grid.areaname": "Nama daerah",
 	"grid.signnum": "Jumlah yang dialokasikan",
 	"grid.woodenboxcode": "Kode Kardus Kayu",
+	"grid.prepare-set-shaft": "Persiapkan poros",
+	"grid.delivery-in-progress": "Pengiriman",
+	"grid.delivery-completed": "Pengiriman selesai",
+	"grid.completed": "Selesai",
+	"toast.confirm-whether-clear-pointdata": "Memastikan apakah data titik telah dihapus?",
+	"toast.confirm-bind-sub-roll": "Memastikan apakah subvolume diikat?",
+	"toast.confirm-bind-inflation-axis": "Memastikan apakah Anda mengikat poros inflasi?",
+	"toast.confirm-create-AGV-task-to-inner-room": "Memastikan apakah membuat tugas AGV yang dikirim ke dalam paket?",
+	"toast.confirm-call-truss-inflation-axis": "Kau yakin panggilan pada poros inflator?",
 	"select.uppershaft": "Poros Atas",
 	"select.lowershaft": "Poros bawah",
 	"select.leftroll": "Gulung Kiri",
-	"select.rightroll": "Gulung kanan"
+	"select.rightroll": "Gulung kanan",
+	"select.3c4d": "3 inci 4 generasi",
+	"select.3c5d": "3 inci 5 generasi",
+	"select.6c4d": "6 inci 4 generasi",
+	"select.6c5d": "6 inci 5 generasi"
 }
\ No newline at end of file
diff --git a/locale/zh-Hans-1.json b/locale/zh-Hans-1.json
index 7703997..ffce2e1 100644
--- a/locale/zh-Hans-1.json
+++ b/locale/zh-Hans-1.json
@@ -26,6 +26,8 @@
 	"button.emptydiskrecycle": "空盘回收",
 	"button.upperfullroll": "上满卷",
 	"button.weigh-check": "称重校验",
+	"button.close": "关闭",
+	"button.urgent": "加急",
 	"filter.bill-code": "单据编码",
 	"filter.warehouse": "仓库",
 	"filter.woodenbox": "木箱",
@@ -86,8 +88,22 @@
 	"grid.areaname": "区域名称",
 	"grid.signnum": "已分配数量",
 	"grid.woodenboxcode": "木箱码",
+	"grid.prepare-set-shaft": "准备套轴",
+	"grid.delivery-in-progress": "正在配送",
+	"grid.delivery-completed": "配送完成",
+	"grid.completed": "已完成",
+	"toast.confirm-whether-clear-pointdata": "确认是否清除点位数据？",
+	"toast.confirm-bind-sub-roll": "确认是否绑定子卷？",
+	"toast.confirm-bind-inflation-axis": "确认是否绑定气胀轴？",
+	"toast.confirm-create-AGV-task-to-inner-room": "确认是否创建送到内包间AGV任务？",
+	"toast.confirm-call-truss-inflation-axis": "确定呼叫桁架上气胀轴？",
 	"select.uppershaft": "上轴",
 	"select.lowershaft": "下轴",
 	"select.leftroll": "左卷",
-	"select.rightroll": "右卷"
+	"select.rightroll": "右卷",
+	"select.3c4d": "3寸4代",
+	"select.3c5d": "3寸5代",
+	"select.6c4d": "6寸4代",
+	"select.6c5d": "6寸5代"
+	
 }
\ No newline at end of file
diff --git a/pages/SecondPhase/slitting/CacheClean.vue b/pages/SecondPhase/slitting/CacheClean.vue
index 866ee9c..50029dd 100644
--- a/pages/SecondPhase/slitting/CacheClean.vue
+++ b/pages/SecondPhase/slitting/CacheClean.vue
@@ -29,7 +29,8 @@
 			<button class="zd-col-8 btn-submit btn-success" :class="{'btn-info': !val1 || !val2}" @tap="toSure3">{{$t('button.qzzbind')}}</button>
 		</view>
 		<uni-popup ref="alertDialog" type="dialog">
-			<uni-popup-dialog type="info" cancelText="关闭" confirmText="确定" title="提示" :content="content" @confirm="dialogConfirm"></uni-popup-dialog>
+			<!-- <uni-popup-dialog type="info" cancelText="关闭" confirmText="确定" title="提示" :content="content" @confirm="dialogConfirm"></uni-popup-dialog> -->
+			<uni-popup-dialog type="info" :cancelText="$t('button.close')" :confirmText="$t('button.confirm')" :title="$t('toast.prompt')" :content="content" @confirm="dialogConfirm"></uni-popup-dialog>
 		</uni-popup>
 	</view>
 </template>
@@ -69,7 +70,7 @@
 				if (!this.val1) {
 					return
 				}
-				this.content = '确认是否清除点位数据？'
+				this.content = this.$t('toast.confirm-whether-clear-pointdata')
 				this.type = 1
 				this.$refs.alertDialog.open()
 			},
@@ -88,7 +89,7 @@
 				if (!this.val1 || !this.val2) {
 					return
 				}
-				this.content = '确认是否绑定子卷？'
+				this.content = this.$t('toast.confirm-bind-sub-roll')
 				this.type = 2
 				this.$refs.alertDialog.open()
 			},
@@ -107,7 +108,7 @@
 				if (!this.val1 || !this.val2) {
 					return
 				}
-				this.content = '确认是否绑定气胀轴？'
+				this.content = this.$t('toast.confirm-bind-inflation-axis')
 				this.type = 3
 				this.$refs.alertDialog.open()
 			},
diff --git a/pages/SecondPhase/slitting/CacheCut.vue b/pages/SecondPhase/slitting/CacheCut.vue
index 6c8dfb8..808dd1f 100644
--- a/pages/SecondPhase/slitting/CacheCut.vue
+++ b/pages/SecondPhase/slitting/CacheCut.vue
@@ -115,8 +115,7 @@
 				}
 				if (type === 1) {
 					uni.showModal({
-						title: '提示',
-						content: '确认是否创建送到内包间AGV任务？',
+						content: this.$t('toast.confirm-create-AGV-task-to-inner-room'),
 						confirmColor: '#ff6a00',
 						success: (res) => {
 							if (res.confirm) {
diff --git a/pages/SecondPhase/slitting/CallShaft.vue b/pages/SecondPhase/slitting/CallShaft.vue
index 10ee507..150a19a 100644
--- a/pages/SecondPhase/slitting/CallShaft.vue
+++ b/pages/SecondPhase/slitting/CallShaft.vue
@@ -51,7 +51,7 @@
 								<th>{{$t('grid.number')}}</th>
 								<th class="th_2">{{$t('filter.device')}}</th>
 								<th>{{$t('grid.place')}}</th>
-								<th><view style="width: 220rpx;">tube</view></th>
+								<th><view style="width: 220rpx;">{{$t('filter.tubecode')}}</view></th>
 								<th>{{$t('grid.status')}}</th>
 								<th>{{$t('grid.calltime')}}</th>
 								<th>{{$t('grid.operate')}}</th>
@@ -61,13 +61,13 @@
 							<tr v-for="(e, i) in dataList" :key="i">
 								<td>{{Number(i) + 1}}</td>
 								<td class="td_2">{{e.resource_name}}</td>
-								<td>{{['上轴', '下轴'][Number(e.up_or_down) - 1]}}</td>
+								<td>{{[$t('select.uppershaft'), $t('select.lowershaft')][Number(e.up_or_down) - 1]}}</td>
 								<td class="wrap">{{e.tube}}</td>
 								<td>{{getStatusText(e.status)}}</td>
 								<td>{{e.start_time}}</td>
 								<td>
 									<view style="display: flex; align-items: center;">
-										<button v-show="e.status === '01'" class="mini-btn" size="mini" type="primary" :disabled="disabled" @tap="_urgentPlan(e)">加急</button>
+										<button v-show="e.status === '01'" class="mini-btn" size="mini" type="primary" :disabled="disabled" @tap="_urgentPlan(e)">{{$t('button.urgent')}}</button>
 									</view>
 								</td>
 							</tr>
@@ -267,11 +267,11 @@
 			},
 			getStatusText(status) {
 				const statusMap = {
-					'01': '准备套轴',
-					'02': '正在配送',
-					'03': '配送完成'
+					'01': this.$t('grid.prepare-set-shaft'),
+					'02': this.$t('grid.delivery-in-progress'),
+					'03': this.$t('grid.delivery-completed')
 				}
-				return statusMap[status] || '已完成'
+				return statusMap[status] || this.$t('grid.completed')
 			},
 			async _showManualView () {
 				let res = await showManualView()
diff --git a/pages/SecondPhase/slitting/EmptyAxisReturn.vue b/pages/SecondPhase/slitting/EmptyAxisReturn.vue
index 56133f3..c77585f 100644
--- a/pages/SecondPhase/slitting/EmptyAxisReturn.vue
+++ b/pages/SecondPhase/slitting/EmptyAxisReturn.vue
@@ -61,7 +61,7 @@
 				options2: [],
 				index2: '',
 				obj: {a_point: '-', b_point: '-', status: '-'},
-				options1: [{text: '3寸4代', value: '3-4'}, {text: '3寸5代', value: '3-5'}, {text: '6寸4代', value: '6-4'}, {text: '6寸5代', value: '6-5'}],
+				options1: [{text: this.$t('select.3c4d'), value: '3-4'}, {text: this.$t('select.3c5d'), value: '3-5'}, {text: this.$t('select.6c4d'), value: '6-4'}, {text: this.$t('select.6c5d'), value: '6-5'}],
 				size1: '',
 				size2: '',
 				disabled: false
@@ -134,8 +134,7 @@
 					return
 				}
 				uni.showModal({
-					title: '提示',
-					content: '确认是否创建送到内包间AGV任务？',
+					content: this.$t('toast.confirm-create-AGV-task-to-inner-room'),
 					confirmColor: '#ff6a00',
 					success: (res) => {
 						if (res.confirm) {
diff --git a/pages/SecondPhase/slitting/TestNumInput.vue b/pages/SecondPhase/slitting/TestNumInput.vue
index 50d5229..2cc4c39 100644
--- a/pages/SecondPhase/slitting/TestNumInput.vue
+++ b/pages/SecondPhase/slitting/TestNumInput.vue
@@ -6,7 +6,7 @@
       :max="999.999"
       input-class="filter_input"
     />
-    <text>当前值: {{ numberValue }}</text>
+    <text>{{ numberValue }}</text>
   </view>
 </template>
 
diff --git a/pages/SecondPhase/slitting/UpperShaftCut.vue b/pages/SecondPhase/slitting/UpperShaftCut.vue
index 7bef450..1c8fad2 100644
--- a/pages/SecondPhase/slitting/UpperShaftCut.vue
+++ b/pages/SecondPhase/slitting/UpperShaftCut.vue
@@ -117,8 +117,7 @@
 					return
 				}
 				uni.showModal({
-					title: '提示',
-					content: '确定呼叫桁架上气胀轴？',
+					content: this.$t('toast.confirm-call-truss-inflation-axis'),
 					confirmColor: '#ff6a00',
 					success: (res) => {
 						if (res.confirm) {